SLASH 4X4 HD STEEL FRONT CVD AXLE SET, for the 4wd SLASH front

0 Review(s) Write a Review

Your Price: $36.95

Ask a Question

Part Number: 2131

Availability: In Stock.

Quantity

Description

Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the SLASH 4x4 and RALLY.

Reduced parts count and all steel construction insures reliable racing without fear of deforming or popping out the stock plastic axle sets.
Improved traction from improved suspension action due to less axle binding (the plastic sliders locks up when on throttle, preventing the suspension from moving freely).
The new diff cups uses 2 set screws instead of the straight pin to remove all of the slop and reduces vibrations.
New retaining sleeve for improved 2mm pin holding.

Compatibility;

SLASH 4X4 (FRONT)

You may use these 2x12mm pins if replacement cvd pins are needed.

Requires blue thread lock and cvd oil or grease- not included.

Important: You want to reassemble with thick grease and apply blue thread lock to the set screw and tighten it with a quality hex tool, never an allen key which strips easily. Never over tighten hardware also. Be sure to degrease the set screw and threads so that the loctite can actually cure. If it's oily then it will not cure and can fall out.

$42.95 MSRP

SLASH 4X4 HD STEEL FRONT CVD AXLE SET, for the 4wd SLASH front

Recently Viewed Items