CARBON FIBER BATTERY CUP VERSION FOR NO WEIGHT LIMIT TYPE RACING.

    1.    -The XR2 chassis is designed and tested to equalize lateral flex. No more inconsistent flex problems caused by 6 large battery cut outs like in the stock chassis. The net result is much more predictable handling.

    2.    -2mm thick chassis to mimic the flex of the stock chassis. Deleting the 6 nimh battery cut outs effectively stiffens the chassis. Reducing the thickness to 2mm puts a little flex back into the chassis for improved traction.

    3.    -3 side ways battery mounting positions. 

    4.    -2 front or back battery mounting positions.

    5.    -The forward battery position is same as the stock position for neutral handling. The rear option position moves the battery back a few mm back for extra off power steering.

    6.    -2 piece battery weights insures these cannot tweak the chassis.

    7.    -American made quasi weave 2mm thick carbon fiber. 

    8.    -Narrowed chassis (96mm wide) for less chassis scrub through corners for better corner speed.

    9.    -Includes special battery strapping tape tabs.

    10.    -Multi adjusting center battery rail to custom fit your battery for a perfect snug fit.

    11.    -Accepts 7.4 volt FLAT BOTTOM type cased lipos such as Thunder Power 5000, Orion Platinum Series or similar sized lipo batteries.


XRAY T2 009, 008 OR T2R PRO IS REQUIRED.

$84.95 MSRP