Pro carbon fiber chassis conversion for the ABC Goose (Goose kit is required). Turn the Goose into a Tamiya destroying MONGOOSE!

Includes;
-High grade USA made quasi weave carbon fiber.
-2mm  bottom plate- new rear biased design for improved rear grip and stability. Stock wheelbase only.
-2mm mm top plate- 'flex' design for greatly improved overall traction.
-Ultra narrow chassis for improved cornering without bottoming out.
-Includes extra mounting holes in the chassis so that you may use Tamiya TRF toe blocks so that you can adjust the hinge pins angles! Adjustable toe and roll centers!! HERE
-Special lipo hold in wing set and alloy posts- trick lightweight design for easy square or round lipo access (flat bottom lipos). Accepts full size lipos or the new breed of 'Shorty' 3800mah lipos!
-New geometry carbon fiber steering rack (improved bump steer and smoother ackerman)
-Includes 2 longer steel steering turnbuckles for smoother steering and reduced bump steer.
- Repositioned servo location for more balanced electronics mounting and for more rear bias for better handling.

$114.95 MSRP


NOT INCLUDED- The carbon fiber shock towers shown.

ALL PURPOSE MONGOOSE SET UP USING TAMIYA DAMPENERS AND SPRINGS;

front-
5mm ride h
2deg camber
0 toe
yellow springs
50wt oil/ 3 hole piston
outter hole on extotek tower
droop= 20mm, top of axle to ground

rear-
5.5mm ride h
1.5deg cam
stock toe
red springs
50wt oil/ 3 hole piston
inner hole on exotek tower
droop= 21.5mm, top of axle to ground

general-
all weight at the back of chassis, battery, esc etc
abc tires
diff is free but not loose (ABC ALLOY DIF)
abc motor
no spacers under the hinge pin blocks
exotek MONGOOSE


Enough rear ride height is critical- too low and too soft will result in rear of chassis hitting the ground.

Enjoy!