Loading... Please wait...

F1 ULTRA formula car kit 1/10 f1ultra

Name:
F1 ULTRA formula car kit 1/10 f1ultra
Your Price:
$379.95
Serial Number:
F1R4
Quantity:

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15

Product Description

ultra-banner.jpg

 

dsc-2292.jpg

PDF MANUAL

F1ULTRA SETUP FORUM

ASPHALT SETUP - LARGE TRACK

CARPET SET UP 

Note- Use the stock plastic servo horns or a servo saver. Never an alloy servo horn in open wheel cars.

 

Winner of the 2020 Roar Carpet Nationals and 2019 Protoform Cup!

This has been a passion project we’ve been working on for many years and also our very first full kit release! After years of adding innovation to other F1 kits we’ve figured it was time to release our own kit incorporating cutting edge patented chassis technology with high quality components and features you’ve grown to expect from Exotek.  Importantly we didn’t just redesign a 1/12 chassis to be an F1 car, we have designed the F1ULTRA to be an F1 chassis from the ground up. You will appreciate the details we've designed in to maximize rubber tire grip as well as add extra durability that these very unique cars require.

The Exotek F1ULTRA is loaded with high-performance innovations that features;

-Patent pending floating rear pod suspension system. Provides unmatched rear traction needed for rubber tire F1 racing. Because the rear suspension generates so much rear traction you are able to use more aggressive front tires which translates to greatly improved lap times and full race length consistency.

-Extra narrow chassis (only 72mm wide) for improved ground clearance and faster corner speeds

-Ultra smooth sealed micro shocks for maintenance free rear pod tuning and only 3.8gr each including the oil!

-Micro shocks includes 3 tuning spring sets for low, medium and high grip tracks

-Innovative double spring top 'clutch' shock uses an additional internal spring to provide increased forward bite

-Chassis mounted, lightweight rear wing mount. Simple and elegant design that increases the overall rear grip

-Extra long, heavy duty no flex side links. The longest links of any F1 car provides less rear pod angling (less rear bump steer) as the rear tires travel up and down for improved high speed consistency

-One piece, heavy duty, machined alloy rear pod. Provides tweak free racing, extra traction and improved motor cooling

Heavy duty oversized 1/4" rear axle bearings. Much much stronger than typical smaller standard 1/4" pan car bearings.

-One piece heavy duty machined alloy front bulkhead provides rock solid front suspension mounting

-Two piece hybrid chassis is optimized to work on all track conditions including low grip asphalt and high grip black carpet.

-Long and short wheelbase adjustment for large and small tracks.

-Machined alloy precision steering rack and post included

-Easy adjust front camber and caster turnbuckle system means no clumsy 'camber inserts' to deal with for quick and precise adjustments without even the need to remove the body

-6 sided turnbuckles for easier turnbuckle wrench access (uses 4mm wrenches)

-Extra heavy duty 3mm thick front arms for tweak free racing

-Super smooth and lightweight pro ball diff included that uses 1/12th style spur gears and diff parts

-Secure shorty lipo tray with carbon lipo tab for easy lipo access

-Open rear pod design makes for easier tweak free motor wire routing

-High quality premium metric YFS screws used throughout

-Heavy duty, high visibility, multi element front wing included

-Lightweight, high visibility, high downforce, adjustable rear wing included

-Can be used with aftermarket F1 gear diffs or spools (1/4" axles etc) and 1/12 spur gears

The tires, lipo and motor shown are not included.

Compatible with these modern 1/10 F1 race bodies such as Protoform F26, MonTech F18 / F17, Bitty Type-6, Jconcepts J21 etc.

dsc-2321.jpg

dsc-2318.jpg

dsc-2316.jpg

dsc-2315.jpg

dsc-2319.jpg

dsc-2317.jpg

dsc-2314.jpg

dsc-32322.jpg  

roarnats2.jpg

 

The tires, lipo and motor shown are not included.

Compatible with these modern 1/10 F1 race bodies such as Protoform F26, MonTech F18 / F17, Bitty Type-6, Jconcepts J21 etc.

REQUIRED TO COMPLETE THE KIT
• 1:10 Scale Electric Motor• Electronic Speed Control• Steering Servo• 3.7v-7.4v LiPo or 6.0v LiFe “Shorty” Battery• Battery Charger• 2-Channel Surface Radio System• 1:10 Scale F1 Wheels and Rubber (or Foam) Tires • 1:10 Scale Polycarbonate F1 Body• Polycarbonate-Specific Spray Paint for Body• Servo Tape (3M brand is best)
 
REQUIRED TOOLS
• High Grade Machined Hex Wrenches - 1.5, 2.0• Nut Wrench- 5.5, 7.0• 4mm Turnbuckle Wrench• Hobby knife• Calipers or a precision ruler• Silicone glue (goop)• Body Scissors• Reamer/Hole Punch• Long Style Ride Height Gauge• Needle nose pliers
 
FOR EXPERIENCED HOBBYISTS ONLY, 16 YEAR OLD AND OVER. 
 
$379.95 MAP
$599.95 MSRP
 
screen-shot-2020-06-30-at-6.56.35-pm.png
dsc-2326.jpg

Write your own product review

Product Reviews

  1. This is the best F1 RC out there! 5 Star Review

    Posted by on 7th Oct 2020

    On black CRC carpet, I can drive this F1 like my USGT car, getting on the throttle much earlier than my other F1 cars. It is truly amazing.


  2. great product 5 Star Review

    Posted by on 30th Aug 2020

    I’m really enjoying this car. Very responsive. Been on the podium with it.


  3. a very unique F1 4 Star Review

    Posted by on 10th Aug 2020

    Very good qualit and easy to build. Super happy with the performance on track


  4. Great F1 4 Star Review

    Posted by on 9th Aug 2020

    I loved the build and design. Best F1 on the market hands down. The only flaw is the drive shaft needs to be redesigned. It’s fragile and broke with a wall tap. Fix the drive shaft and it’s five stars easily.


  5. Wave of the Future 5 Star Review

    Posted by on 6th Aug 2020

    Exotek has drawn a line in the sand that I'm not sure any other companies will be able to cross without imitating this design. I would give this car 6 stars if possible


  6. LAYOUT RIVOLUZIONARIO 5 Star Review

    Posted by on 3rd Aug 2020

    Ottimo prodotto !! l'assemblaggio risulta facile
    senza nessun tipo di complicanze, realizzato con pezzi di ottima qualità, peccato che non ho avuto ancora il tempo per provarlo in pista..

    Great product !! assembly is easy
    without any kind of complications, made with pieces of excellent quality, too bad I haven't had the time yet to try it on the track ..


  7. Revolutionary Design 5 Star Review

    Posted by on 28th Jul 2020

    This car is by far the best F1 I have driven yet. Rear grip is incredible due to the contact patch the rear pod creates for the rear tires. The innovative center spring provides tons of on power grip and the front end gives you lots of options to make the quick adjustments to find the steering to balance your set up. Durability is impressive and allows you to take the chances to grab those last tenths for the win!


  8. the best f1 made 5 Star Review

    Posted by on 27th Jul 2020

    Car is awesome floating pod is a great idea run this f1 you won’t be sorry



Product Videos

PROTOFORM CUP 2019 FORMULA 1 A-MAIN (06:07)
ELECTRIC F1 AMAIN, EXOTEK WINS
  • PROTOFORM CUP ...
    ELECTRIC F1 AMAIN, EXOTEK WINS