9/30/09
High performance multi adjustment lipo chassis for uncompromising balanced lipo performance. With the unique cnc manufactured stainless steel weights your lipo battery can be positioned to have equal left and right balance within grams without the need to add lead weight and without raising the battery up higher.
-
-100% COMPATIBLE WITH HOT BODIES CYCLONE, CYCLONE TC OR CYCLONE-S.
-
-The HBX chassis is designed and tested to equalize lateral flex. No more inconsistent flex problems caused by 6 large battery cut outs like in the stock chassis. The net result is much more predictable handling.
-
-2mm thick chassis to mimic the flex of the stock chassis. Deleting the 6 nimh battery cut outs effectively stiffens the chassis. Reducing the thickness to 2mm puts a little flex back into the chassis for improved traction.
-
-Extra rear cut outs to increase rear flex and traction.
-
-Reduced front cut out helps stiffen the front bulkhead for better stability.
-
-2 side ways battery mounting positions.
-
-2 front or back battery mounting positions.
-
-2 piece battery weights insures these cannot tweak the chassis.
-
-American made quasi weave 2mm thick carbon fiber.
-
-Narrowed chassis (96mm wide) for less chassis scrub through corners for better corner speed.
-
-Includes special battery strapping tape tabs.
-
-Multi adjusting center battery rail to custom fit your battery for a perfect snug fit.
-
-Accepts 7.4 volt flat bottom cased lipos such as Thunder Power 5000, Orion Platinum Series or similar sized lipo batteries with 24mm maximum battery height..
-
-BECAUSE OF THE LOW CLEARANCE OF THE CYCLONES LEFT BULKHEAD, SOME TALLER BATTERIES MAY REQUIRE THAT YOU FILE THE BULKHEAD FOR PROPER BATTERY CLEARANCE. IF YOUR LIPO DOES NOT FIT ON YOUR CURRENT CHASSIS THEN IT WILL NOT FIT THE HBX CHASSIS AS WELL. YOU WILL NEED TO FILE THE BULKHEAD HERE (INSTRUCTIONS INCLUDED WITH THE HBX) OR YOU WILL NEED TO PURCHASE THE NEW HOT BODIES LIPO BULKHEAD/ TOP PLATE SET PART #67695
Stainless steel machined weights. Each weight is 1oz (30grams).
HOT BODIES CYCLONE, CYCLONE TC OR CYCLONE-S IS REQUIRED.
SOLD SEPARATELY;
HBX BATTERY STRAP (SEE BELOW)
ALSO AVAILABLE...
HBX CARBON BATTERY STRAP
If you hate tape then this is the strap for you! Custom fit for the HBX chassis. Use the supplied shims under each post to match the correct height of your battery to avoid tweaking the chassis.
2mm thick quasi weave carbon fiber.
