7/24/09
High performance multi adjustment lipo chassis for uncompromising balanced lipo performance. With the unique cnc manufactured stainless steel weights your lipo battery can be positioned to have equal left and right balance within grams without the need to add lead weight and without raising the battery up higher.
-
-The MI3X chassis is designed and tested to equalize lateral flex. No more inconsistent flex problems caused by 6 large battery cut outs like in the stock chassis. The net result is much more predictable handling.
-
-4 bulkhead channel cuts effectively shorten the bulkheads for increased chassis flex similar to other modern rubber tire touring cars for increased overall grip.
-
-2 side ways battery mounting positions.
-
-2 front or back battery mounting positions.
-
-2 piece battery weights insures the chassis cannot be tweaked.
-
-100% American made quasi weave 2mm thick carbon fiber.
-
-Narrowed chassis (96mm wide) for less chassis scrub through corners for better corner speed.
-
-Includes special battery strapping tape tabs.
-
-Accepts 7.4 volt flat bottom cased lipos such as Thunder Power 5000 or similar sized lipo batteries with 24mm maximum battery height.
-
-Servo mounting is moved forward a few mm for extra room for other electronics.
-
-Extra cut outs in the rear to help generate more rear traction for rubber tires.
-
-Multi adjusting center battery rail to make sure your battery sits snugly in place.
SHUMACHER MI3 OR MI3.5 IS REQUIRED.
SOLD SEPARATELY;
MI3X CHASSIS SET
MI3X EXTRA FLEX TOP PLATE (SEE BELOW)
MI3X BATTERY STRAP (SEE BELOW)
ALSO AVAILABLE...
MI3/MI3.5 EXTRA FLEX TOP PLATE
Designed and tested to improve overall rubber tire grip. The longer center cut provides more flex to the rear of the chassis. 2mm thick American made quasi weave carbon fiber.
MI3X CARBON BATTERY STRAP
If you hate tape then this is the strap for you! Custom fit for the MI3X chassis. Use the supplied shims under each post to match the correct height of your battery to avoid tweaking the chassis.
2mm thick American made quasi weave carbon fiber.
Stainless steel machined weights. Each weight is .75oz (21grams).
$84.95
STEEL BATTERY CUP VERSION
