7/21/09
High performance, super low profile, lightweight chassis conversion that takes the CUP RACER to the next level! Converts your CR into a real race platform by mounting the battery and servo onto the bottom plate instead of the top plate for lower center of gravity, reduced bump steer, reduced chassis tweak and of course easier battery mounting and more battery options.
-
-The CRX chassis is designed and tested to equalize lateral flex. The top plate runs down the middle of the chassis for more equal flex over the stock top plate.
-
-Carbon fiber battery strap included.
-
-100% American made quasi weave 2mm thick carbon fiber top and bottom plates.
-
-Still has a narrow profile for less chassis scrub in corners.
-
-6 mini cut outs in the chassis securely locks in batteries that have 12 nubs on the bottom such as Orion 3200 or Thunder Power 3200 lipo packs.
-
-Also accepts 7.4 volt flat bottom cased lipos such as Thunder Power 5200, Orion Platinum Series or similar sized lipo batteries.
-
-The stock Cup Racer battery tray can be inserted into the CRX for safely mounting 6 cell NIMH packs.
-
-Includes orange anodized battery posts.
-
-Servo mounting is moved forward a few mm for extra room for other electronics.
-
-Includes nylon servo mounts for 1/10th servos.
-
-Can accept 1/12th scale pan car servos (1/12th servo mounts not included)
-
-Can still mount lay down front shocks.
-
-Maintains the stock wheelbase.
HPI CUP RACER KIT IS REQUIRED
SHOWN WITH ABC HOBBY WHEELS AND TIRES
