6/29/09
High performance multi adjustment lipo chassis for uncompromising balanced lipo performance. With the unique cnc manufactured stainless steel weights your lipo battery can be positioned to have equal left and right balance within grams without the need to add lead weight and without raising the battery up higher.
-
-The TC5X chassis is designed and tested to equalize lateral flex. No more inconsistent flex problems caused by 6 large battery cut outs like in the stock chassis. The net result is much more predictable handling.
-
-3 side ways battery mounting positions.
-
-2 front or back battery mounting positions.
-
-2 piece battery weights insures the chassis cannot be tweaked.
-
-Extra chassis pulley cut outs allows for belt flipping to mount ESC and Receiver closer to the center.
-
-100% American made quasi weave 2mm thick carbon fiber.
-
-Narrowed chassis (100mm wide) for less chassis scrub through corners for better corner speed.
-
-Includes special battery strapping tape tabs.
-
-Accepts 7.4 volt flat bottom cased lipos such as Thunder Power 5000, Orion Platinum Series or similar sized lipo batteries.
-
-Servo mounting is moved forward a few mm for extra room for other electronics.
-
-Extra cut outs in the rear to help generate more traction for rubber tires.
-
-Multi adjusting center battery rail to make sure your battery sits snugly in place.
Stainless steel machined weights. Each weight is 1oz (30grams).
ASSOCIATED TC5, TC5R OR TC5F IS REQUIRED.
See also the Exotek TC5 lowered layshaft bearing caps for reduced belt tension here. <<<<<<<<<<<<<<<<<<<<<<
SOLD SEPARATELY;
TC5X CHASSIS SET
TC5X EXTRA FLEX TOP PLATE (SEE BELOW)
TC5X BATTERY STRAP (SEE BELOW)
TC5 BEARING CAP (SEE BELOW)
TC5X EXTRA FLEX TOP PLATE
Designed and tested to improve overall rubber tire grip. The longer center cut provides more flex to the rear of the chassis. Non countersunk holes also provides better machined tolerance then the stock plate and more force to lock in the included button head screws to reduce tweaking. 2mm thick American made quasi weave carbon fiber.
Includes nylon
antenna mount for
use with the TC5X bottom
plate.
TC5X CARBON BATTERY STRAP
If you hate tape then this is the strap for you! Custom fit for the TC5X chassis. Use the supplied shims under each post to match the correct height of your battery to avoid tweaking the chassis.
2mm thick American made quasi weave carbon fiber.
