Loading... Please wait...

1726 FLITE DIRECT SPUR MOUNT, ultra light

1726 FLITE DIRECT SPUR MOUNT, ultra light
Your Price:
Serial Number:

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8

Product Description

Our lightest system yet for increased acceleration and a cooler running motor.

Extra light slipper eliminator spur gear mounting hub for all B6 series, 22 series and RB6 series buggies and trucks.

This spur hub is designed for use on Exotek 2017 'Flite' top shafts #1867 1721, 1723, 1725 sold separately.

In the world of ultra competitive stock racing at indoor tracks, every grams counts and there is no better way to separate yourself from the pack than having a more efficient and lighter drive train.

Less than half the weight of the stock top shaft and slipper and lighter still than our standard spur mount set, when combined with our special lightened top shafts.

Choice of polished 7075 blue, black or orange.


Includes M3x6 hardware for use with Exotek spur gears.

For Kimbrough spurs use M3x5 screws (not included) or M3x6 screws with 1mm thick washers.


$14.95 MSRP.


EXOTEK or Kimbrough spur gears required;

#301 66 tooth

#150 69 tooth

#143 72 tooth

#161 73 tooth

#162 74 tooth

Write your own product review

Product Reviews

  1. Love this slipper eliminator! 5 Star Review

    Posted by on 29th Dec 2017

    Such a great system for Stock 17.5 racing. Makes the buggy so much easier to drive. Super smooth and keeps the rear end from getting loose! Highly recommended!!

  2. The best slipper lock out. 5 Star Review

    Posted by on 13th Aug 2017

    I just ran my buggy this past weekend with the new slipper lock out, and all I can say is wow. My car handled awesome.

  3. Great product prefect for Stock racing. 4 Star Review

    Posted by on 28th Mar 2017

    Purchased this along with the Flight Spur gear and the Flight top shaft. I'll say it's a great combo! There is one complaint I have that I was a little disappointed with. When I attached the spur gear to the Direct mount and tightened up with the provided screws and they we're actually to long. I spun the spur gear around a couple of time to make sure everything was free spinning. While doing so the screws stuck to far out the back of the spur mount and scratched my motor plate. My fix was adding a .5 shim to each of the three screws and then re installing them. So far so good. Great product none the less! Just change the screw size! Simple fix.

    Hello and Thanks!
    We wonder if you are using some kind of motor plate that is spaced closer to the spur gear or thicker than stock? We could not replicate the scratching problem using the stock or Exotek motor plates.